Rain water harvesting has become an important consideration. The need to successfully capture surface run off water to fulfill the demands of the growing population is something people and governments of the world cannot afford to brush aside anymore. The technique involved or the basic concept is not a new one at all and now, more than ever, we need to think about investing in rain water harvesting tanks, barrels, cisterns and butts. The method is simple.
The surface rain water that collects in hollows in the ground or roof tops or any unpaved catchment area is routed with the help of furrows or pipes to a storage tank. The tank is pre fitted with in built filters and can be customized to size and shape and material. Most of the rain water harvesting tanks are manufactured from low density polyethylene and food grade material. The overall design is leak proof and photo resistant. The used raw-material in the rain water harvesting tanks is completely recyclable and this makes the installation very eco friendly.
The rain water harvesting tanks are designed by professionals who adhere to all necessary Health & Safety requirements laid down by the local governing bodies and the law of the state. The installations are done taking into consideration the natural terrain of the place, the capacity of the tank, the consumption per head calculated and the material used. The souring of surface rain water is handled by in built pipes within the design of the rain water harvesting tanks. These pipes that are fitted on either side of the tanks address the accumulation of water from one end and the re-routing o the same whenever required from the other.
The storage of rain water during the monsoons can be re sued during the dry summer months. The rain water harvesting tanks are designed for domestic and industrial purposes and they can be accessed 24×7 from manufacturers and retailers who are dedicated to the endeavor. Reinforced cement is used just in case the area prepared for the installation happens to be within a high water table area. The reason being overflow, though the tanks are individually fitted with overflow valves to heck this development. Surprisingly, if the stored water in the rain water harvesting tanks is used wisely, the volume can suffice the requirements for the entire length of summer! But, the amount of surface rain water that can be stored depends a lot on the amount of rainfall the region receives.
The rain water harvesting tanks are designed and engineered by professional structural engineers who take extra care to ensure that the rain water harvesting tanks do not, under any conditions become buoyant or deformed in any way. The requirements for retaining walls and support for the tank, once installed, are taken care of by the engineers who handle the installation. The rain water harvesting tanks are evenly hand compacted and fitted with overflow valves. The tanks are sealed and the in built filtration keeps debris at bay when the water is being re-channelized.
For personal service for your rainwater tank call now on 1300 88 94 90
Or Email you inquiry to firstname.lastname@example.org
Next Article: How To Harvest Rainwater