The walls of these tanks are made from 1.0mm thick rolled form Bluescope Steel Zincalume sheets and are lined with a 0.75mm thick Polyethelyene (EVA) Hydro liner which exceeds the Australian Potable Standard AS4020. They have domed roofs which use structural certified steel, are fully welded and hot dipped galvanised.
They carry a 20 year prorata warranty covering both corrosion and construction.
Prices shown are for most areas of New South Wales, Victoria, South Australia and Queensland. Prices are for Zincalume or one of five Colourbond Colours: Classic Cream, Woodland Grey, Deep Ocean, Ironstone and Wilderness. For other colours add 10%. To confirm you are within the supply and installation area please call us on 1300 88 94 90.
These tanks are made from Bluescope AQUAPLATE® steel, which combines the strength of zinc-coated steel with a revolutionary, food grade polymer coating. The polymer is on the inside of the tank walls and on both sides of the base (inside and out) so that water never touches the steel directly. These tanks carry a 20 year warranty against corrosion and a 10 year warranty against construction faults.
Prices shown are for tanks delivered in metropolitan Brisbane, Sydney, Melbourne and Adelaide. Prices included three standard prefinished colours - Paperbark, Pale Eucalypt or Plain Galvanised. If you’d like a different colour, the tanks can also be painted in 18 additional Colorbond colours. For prices on non-standard colours, or for delivery outside of the listed areas, please call us on 1300 88 94 90.
All tanks can be made in a wide range of dimensions. For slimlines, modlines and square tanks that means the Height, Length and Width can all be varied, while for round tanks the Height and Diameter can be tailored to your requirements.
While each of the following tanks have been referenced by their maximum heights, they can be supplied in reduced heights if that is what you want.
Standard fittings for all tanks with prefix TW which are available within approximately 100kms of Brisbane, Sydney and Melbourne, and AS or AR which are available in South East Queensland and Northern NSW:
400mm inlet with screened leaf strainer
25mm zinc alloy outlet and brass ball valve
100mm PVC overflow
Standard fittings for all tanks with SA prefix which are only available in South Australia:
400 mm Inlet. Screened leaf strainer not included.
25 mm black glass filled nylon outlet. Brass ball valve not included.
These tanks are made from Grade 304 stainless steel. For tanks close to a marine environment, Marine Grade 316 Stainless Steel is used and the tanks are available at a 33.3% increase to the prices shown below. These tanks carry a 30 year warranty. against corrosion and 15 years against manufacturing faults.
In addition to the dimensions and prices shown below, which apply to tanks delivered ex the factory, the tanks can be made in a wide range of dimensions. For slimlines that means the Height, Length and Width can all be varied, while for round tanks the Height and Diameter can be tailored to your requirements. So for tanks of different dimensions or to enquire about the cost to deliver a tank to your area, please call us on 1300 88 94 90.